Name: ChromaTrim V3
ChromaTrim is a plastic that is UV stabilized; an inexpensive mounting strip to mount 12mm pixels or RGB nodes to your Eaves, Window and Door frames. Please see disclaimer.
The ChromaTrim is designed to make installing 12mm pixels or RGB nodes quickly and easily to eaves, gutters, window trim, door trim, sidewalks, fencing, or about anything else you can imagine. It provides a cost effective solution to trim out your house. The ChromaTrim strips have 12mm node mounting holes placed at 1" centers allowing the end user to choose any spacing they feel is appropriate. Each strip is 7'9" long. Since the ChromaTrim strips are designed to be mounted to a frame of rigid section of 1/2" EMT conduit or PVC pipe.
12mm Node spacing 1"
7'9"' long segment, rolls up for easy shipping
93 12mm pixel/node mounting holes per section
Available in Black and White UV Stabilized
ChromaTrim mounts to PVC pipe or our preferred 1/2" EMT Conduit with ziptie holes
Works with all 12mm nodes including Bullet, Square and Flat
100% American Made from Material, Design, and Fabrication
The ChromaTrim strips are design to be ziptied to a ridged frame with the provides ziptie holes. You can install your pixels or RGB's at 1", 2", 3"... centers. For eave applications you can mount icicle lights to the 1/2" EMT first then attach the ChromaTrim strip for an easy solution to hanging your lights on the eaves. Just take them down and store them with all the lights attached and ready to go for next season.
This material is not designed to be bent, bending will cause stress fractures and cause it to break. To put in pixels use by hand with provide support like a socket to add even support when pushing pixel in the holes. The holes are made universally, this being said bullets can vary in size a bit, so some will fit tighter in the holes. Storing these strips should be hung, need to be kept straight, not rolled or bent.